• Dansk webshop
  • Hurtig levering og fri fragt over 500,-*
  • Over 30.000 kunder
Din indkøbskurv er tom

Bambu quickswap hotend til A1 serien med 0.6 mm. nozzle I hærdet stål

145,00 DKK

(inkl. moms)

Bemærk, passer kun til Bambu A1 serien

Skiftes på under 30 sekunder.

 

Model/Varenr.: FAH020
Lagerstatus: På nærlager, levering 1-2 hverdage
stk.

 

Filament Compatibility

 

Material 0.2 mm Nozzle 0.4 mm Nozzle 0.6 mm Nozzle 0.8 mm Nozzle Hardened Steel Required?
General PLA YES YES YES YES Optional
PLA Sparkle *NO YES YES YES Optional
PLA Marble *NO YES YES YES Optional
Wood/Rock/Metal-filled PLA *NO YES YES YES Optional
PETG YES YES YES YES Optional
PVA YES YES YES YES Optional
ABS YES YES YES YES Optional
ASA YES YES YES YES Optional
PC YES YES YES YES Optional
PA *NO YES YES YES Optional
TPU *NO YES YES YES Optional
Bambu PLA-CF *NO *Highly
Recommended		 YES YES *Required
Bambu PETG-CF *NO *Highly
Recommended		 YES YES *Required


[*Note]

  1. Filaments with carbon fiber, glass fiber, metal, or other inorganic particles are prone to clog a 0.2 mm nozzle.
  2. For filaments containing carbon fiber or glass fiber, it is highly recommended to use a hardened steel 0.6 mm nozzle to minimize the risk of clogging and abrasion.
  3. Bambu PLA-CF and Bambu PETG-CF have been extensively tested and proven to have a low risk of clogging when printed with a hardened steel 0.4 mm nozzle, while also achieving higher print quality.

Relaterede produkter

Kunder der har købt dette produkt har også købt