• Dansk webshop
  • Hurtig levering og fri fragt over 500,-*
  • Over 30.000 kunder
Din indkøbskurv er tom

Bambu komplet hotend kit til X1 serien med 0.8 mm. nozzle I hærdet stål

395,00 DKK

(inkl. moms)

Bemærk, passer kun til Bambu X1 serien (ikke X1E)

Færdigsamlet hotend med blæser, heating tube og thermistor.

Model/Varenr.: FAH003
Lagerstatus: På fjernlager, levering 2-5 hverdage
stk.

Filament Compatibility

Material 0.2 mm Nozzle 0.4 mm Nozzle 0.6 mm Nozzle 0.8 mm Nozzle Hardened Steel Required?
General PLA YES YES YES YES Optional
Wood/Rock/Metal-filled PLA *NO YES YES YES Optional
PETG YES YES YES YES Optional
PVA YES YES YES YES Optional
ABS YES YES YES YES Optional
ASA YES YES YES YES Optional
ASA YES YES YES YES Optional
PC YES YES YES YES Optional
PA *NO YES YES YES Optional
TPU *NO YES YES YES Optional
PLA-CF *NO *Highly
Recommended		 YES YES *Required
PETG-CF *NO *Highly
Recommended		 YES YES *Required
PAHT-CF *NO YES *Highly
Recommended		 YES *Required
PET-CF *NO YES *Highly
Recommended		 YES *Required


[*Note]

  1. Filaments with carbon fiber, glass fiber, metal, or other inorganic particles are prone to clog a 0.2 mm nozzle.
  2. For filaments containing carbon fiber or glass fiber, it is highly recommended to use a hardened steel 0.6 mm nozzle to minimize the risk of clogging and abrasion.
  3. Bambu PLA-CF and Bambu PETG-CF have been extensively tested and proven to have a low risk of clogging when printed with a hardened steel 0.4 mm nozzle, while also achieving higher print quality.

Relaterede produkter

Kunder der har købt dette produkt har også købt